Kode Sekring Mobil Carry
Introduction
In this article, we will discuss the different codes for the fuse box in a Suzuki Carry. The fuse box, also known as the fuse panel, is an essential component of the vehicle's electrical system. It contains fuses that protect various circuits from electrical overloads and short circuits.
Understanding the Fuse Box
The fuse box in a Suzuki Carry is usually located under the dashboard or in the engine compartment. It has multiple fuses, each with a specific ampere rating. These fuses are color-coded for easy identification and replacement.
Color Codes
The color codes for the fuses in a Suzuki Carry are as follows:
- Red - 10 Ampere
- Blue - 15 Ampere
- Yellow - 20 Ampere
- Green - 30 Ampere
Common Fuse Codes
Here are some common fuse codes that you may come across in a Suzuki Carry:
1. Fuse Code: 10A ACC
This fuse is responsible for powering the accessory circuits of the vehicle, such as the radio, cigarette lighter, and power windows.
2. Fuse Code: 15A IG1
This fuse is connected to the ignition switch and provides power to the vehicle's electrical system when the key is turned to the ON position.
3. Fuse Code: 20A STOP
This fuse controls the brake lights of the vehicle. If this fuse blows, the brake lights will not function, which can be a safety hazard.
4. Fuse Code: 30A H/L LOW
This fuse is responsible for the low beam headlights. If the headlights fail to work, it is advisable to check this fuse.
Replacing a Blown Fuse
If a fuse is blown, it will need to be replaced with a new one of the same ampere rating. To replace a blown fuse in a Suzuki Carry, follow these steps:
- Locate the fuse box. Refer to the vehicle's manual for the exact location.
- Identify the blown fuse by checking the color code and the label next to it.
- Using a fuse puller or a pair of pliers, gently remove the blown fuse from its slot.
- Insert the new fuse of the same ampere rating into the empty slot.
- Make sure the fuse is properly seated and not loose.
- Close the fuse box cover.
Conclusion
Understanding the fuse codes in a Suzuki Carry can be beneficial when troubleshooting electrical issues in the vehicle. By knowing the ampere ratings and the corresponding colors, you can easily identify and replace blown fuses. Remember to always refer to the vehicle's manual for accurate information and consult a professional if needed.
Comments
Post a Comment